Direct Connection Of Pc And Cx22-W - HBM QUANTUM X Bedienungsanleitung

CX22-W
Ethernet
WLAN
Ethernet
WLAN
A3169-5.0_en/de
Factory settings for the interfaces
IP address
DHCP
DHCP
Your settings
IP address
Tip
If you are having connection problems, also read Section
7.6 on Page 54.
7.1

Direct connection of PC and CX22-W

Procedure
1. Connect the PC and CX22-W via an Ethernet cable,
category CAT5 or higher.
2. Install the "QuantumX Data Recorder Assistant"
program from the QuantumX System CD.
3. Launch the "QuantumX Data Recorder Assistant"
program: Windows Start menu -> All programs ->
HBM -> QuantumX Data Recorder Assistant

(Windows XP: Windows Start menu -> Programs
-> HBM -> QuantumX Data Recorder Assistant).
4. Click on Find CX22-W.
5. The CX22-W data recorder appears in the top list, the
current address(es) of the interface (WLAN only with
Subnet mask
Subnet mask
29