Setting Up A Connection Via Wlan And Adhoc Network - HBM QuantumX CX22-W Bedienungsanleitung

QuantumX Data Recorder CX22‐W
5. Set up the network for the CX22: Click on Add and enter a name for the
network in the following dialog: Network name (SSID): CX22.
6. In the Association tab, activate the option Connect even if network is
not broadcasting.
7. Activate the option This is a computer‐to‐computer network (Ad‐hoc);
wireless access points are not used.
8. We recommend setting up encryption for the network, even if only the less
secure WEP is possible for Adhoc networks: Enter Open for Network
authentication and WEP for Data encryption.
9. Enter the Network key that you assigned to the CX22.
10. Go to the Connection tab and activate Connect when this network is in
range.
11. Exit the dialog with OK.
The network should now appear in the network list and it should (auto­
matically) appear behind the network name CX22.
12. Go to the General tab, select Internet Protocol (TCP/IP) in the list and
click on Properties.
13. In the following dialog, activate Obtain an IP address automatically and
Obtain DNS server address automatically.
14. Close all dialogs for Wireless Network Connection with OK or Close.

6.3.6 Setting up a connection via WLAN and Adhoc network

1. Start the PC from where the connection is to be set up.
2. Right‐click on the symbol for WLAN displayed in the notification area of
the Windows task bar and select Display available wireless networks.
3. Check that the PC is connected with the "CX22" network or with the net­
work with the name given above under Network name (SSID). If neces­
sary, wait for two minutes after switching on the CX22‐W until the connec­
tion is set up.
4. Start the "QuantumX Data Recorder Assistant" program: Windows Start
button -> All programs -> HBM -> QuantumX Data Recorder Assist­
ant (Windows
QuantumX Data Recorder Assistant).
5. Click on Find CX22.
6. The CX22‐W Data Recorder appears in the top list, the current addresses
of the interfaces are also displayed (Fig. 6.2).
7. Select the CX22‐W in the top list.
8. Click on Remote desktop connection via WLAN.
A3169-1.0 en/de
®
XP: Windows Start button -> All programs -> HBM ->
27
HBM