Preparing The Pc For Connection Via An Adhoc Network - HBM QuantumX CX22-W Bedienungsanleitung

26
5. Create a network if the "CX22" network has been deleted: Click on Add
and enter a name for the network in the following dialog: Network name
(SSID): CX22.
6. Otherwise click on the "CX22" network and click on Properties.
7. Go to the Association tab and activate Connect even if network is not
broadcasting.
8. We recommend setting up encryption for the network, even if only the less
secure WEP is possible for Adhoc networks: Enter Open under Network
Authentication and WEP under Data encryption.
9. Enter a network key: Network key. You may need to deactivate the option
The key is provided for me automatically.
The network key must consist of either 5 or 13 ASCII characters. A longer
key is theoretically more secure, but a really secure connection is currently
only possible with WPA2. However, this encryption method is not available
for Adhoc networks in the CX22‐W.
10. Go to the Connection tab and activate Connect when this network is in
range.
11. Exit the dialog with OK.
If you have just created the network, it should now appear in the network
list. In all cases, (Automatic) should appear after the network name
CX22.
12. Go to the General tab, select Internet Protocol (TCP/IP) in the list and
click on Properties.
13. In the following dialog, activate Obtain an IP address automatically and
Obtain DNS server address automatically.
14. Close all dialogs for Wireless Network Connection with OK or Close.
15. Then double‐click on "CX22 Start Screen".
16. Click on Commit changes and reboot to permanently save the new set­
tings.
Even after the CX22‐W is switched off, the WLAN connection will be automat­
ically set up when a PC that wants to connect to the network is within range
(the name given under 5. is displayed on the PC).

6.3.5 Preparing the PC for connection via an Adhoc network

1. Start the PC from where the connection is to be set up.
2. Call up the Network Connections window via the Windows Start button
and Settings.
3. Right‐click on "Wireless Network Connection" and select Properties.
4. Go to the Wireless Networks tab.
HBM
QuantumX Data Recorder CX22‐W
A3169-1.0 en/de