Preparing The Cx22-W For An Existing Wlan (Access Point); Setting Up Connection Via Wlan - HBM QuantumX CX22-W Bedienungsanleitung

24
Permitted WLAN channels, status 2011
Country/Region
Europe
USA
Japan
6.3.2 Preparing the CX22‐W for an existing WLAN (Access Point)
1. Exit the dialog with OK.
2. Right‐click on "Wireless Network Connection" and select View Available
Wireless Networks.
3. Select the network of your Access Point and click on Connect.
4. If necessary, enter the network key.
5. Close the Wireless Network Connection dialog once the connection has
been set up.
6. Then double‐click on "CX22 Start Screen".
7. Click on Commit changes and reboot to permanently save the new set­
tings.
The connection is automatically restored if the network is in range, even if the
CX22‐W has previously been switched off.

6.3.3 Setting up connection via WLAN

1. Start the "QuantumX Data Recorder Assistant" program: Windows Start
button -> All programs -> HBM -> QuantumX Data Recorder Assist­
ant (Windows
QuantumX Data Recorder Assistant).
2. Click on Find CX22.
3. The CX22‐W Data Recorder appears in the top list, the current addresses
of the interface are also displayed (Fig. 6.2).
HBM
Frequency band
2.4 GHz
5 GHz
2.4 GHz
5 GHz
2.4 GHz
5 GHz
®
XP: Windows Start button -> All programs -> HBM ->
QuantumX Data Recorder CX22‐W
Permitted channels
1 - 13
36 - 64, 100 - 140
1 - 11
36 - 64, 147 - 155
1 - 13
36 - 48
A3169-1.0 en/de