Herunterladen Inhalt Inhalt Diese Seite drucken

Connecting The Cx22-W And Pc Via A Network - HBM QuantumX CX22-W Bedienungsanleitung

Datenrekorder
Vorschau ausblenden Andere Handbücher für QuantumX CX22-W:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

QuantumX Data Recorder CX22‐W
11. If Windows queries whether a connection to the remote computer should
be set up, confirm the connection. We recommend activating the option
Do not ask about connection to this computer again. Depending on
the configuration of your Windows operating system, another query as to
whether the connection should be set up may be displayed (identity of the
remote computer). If necessary, activate the option to prevent the query.
The connection with the CX22‐W Data Recorder will now be implemented
and you must register with the device via Windows. Enter HBMCX22 as
the User name and hbm as the Password. The text for the Password
must be in lower case.
Important
The IP address and subnet mask are not yet saved. In the start screen, click
on Commit changes and reboot to permanently save the new settings. The
CX22‐W is then rebooted, you must therefore set up the connection again
after the new start. (Wait approx. 1 minute until the CX22‐W has rebooted
before clicking on Remote connect using LAN.)
Example for IP address and subnet mask
The IP address of the PC is 169.254.27.81, the subnet mask is 255.255.0.0.
Enter 169.254.27.254 as the IP address and 255.255.0.0 as the subnet mask.
6.2 Connecting the CX22‐W and PC via a network
The settings for the CX22‐W Data Recorder also depend in this case on your
network configuration. Please contact your network administrator to obtain the
correct settings.
1. Connect the CX22‐W via an Ethernet cable, category CAT5 or higher, with
your network.
2. Install the program "QuantumX Data Recorder Assistant" from the Quan­
tumX System CD.
3. Start the "QuantumX Data Recorder Assistant" program: Windows Start
button -> All programs -> HBM -> QuantumX Data Recorder Assist­
ant (Windows
QuantumX Data Recorder Assistant).
4. Click on Find CX22.
5. The CX22‐W Data Recorder appears in the top list, the current
address(es) of the interface (WLAN only with CX22‐W) are also displayed
(Fig. 6.1).
A3169-1.0 en/de
®
XP: Windows Start button -> Programs -> HBM ->
21
HBM

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis