Alarm Conditions; Check Patient Probe Alarm - Stryker Altrix Handbuch

Precision temperature management system

Vorschau ausblenden Andere Handbücher für Altrix:

Handbuch (37 Seiten)

Bedienungsanleitung (1038 Seiten)

Inhaltsverzeichnis

Verfügbare Sprachen

The alarm rank establishes the order of presentation of the alarm on-screen message. The D in the table indicates the

alarm is deactivated during that mode. Maintenance and RFU modes are always in the deactivated mode and are not

listed in the table.

This product maintains the individual alarm status for all alarms as defined below.

Alarm condition present

Visual indicator state

On screen message

Audible indicator state

Current timer for audio pause activation

Alarm rank per therapy mode

Remove from use

Check patient probe

Patient probe malfunction

Probe disconnected

Patient temperature deviation

Water temperature deviation

Check water flow (all ports)

No water flow alarm (all ports) D

Therapy paused timed out

Normothermia deviation

Patient temperature deviation

Power backup level

Patient output deviation

If more than one alarm is active at the same time, the product maintains the active state for the individual alarm

including the audio pause timer. The screen alarms are displayed with the highest level alarm first with a page

toggle to allow the operator to scroll to the subsequent alarms.

The Paused in Auto Paused and Manual Paused refer to the Therapy Pause state.

This alarm notifies the operator that data provided by the probe is not normal or appears removed.

The product only activates the Check Patient Probe Alarm when met during an Active Therapy. Otherwise, the alarm is

Alarm generation:

www.stryker.com