Transportation and Storage
Initial Operation with Electric Back Angle Adjustment
CAUTION
Risk of accidents and injury due to incorrect backrest
assembly. Make sure that the locking mechanism engages
with the cross bolt. Verify that the cross bolt and locking
mechanism are securely in place.
Folding up the backrest:
1. Fold the backrest up.
2. Insert the cross bolt at the end of the drive unit into the
holder.
3. Press the lever down to have the locking mechanism en-
gage with the cross bolt.
Page 122
Fig. 4
Inserting the cross bolt into the holder; locked cross bolt
5
Transportation and Storage
WARNING
Risk of accident and injury due to improper use for trans-
portation in motor vehicles for the disabled. For the time
being, Otto Bock have not yet released the C2000 power
wheelchair for use as a seat for transportation of the user
in motor vehicles for the disabled! Until the power wheelchair
has been released for use as a seat for transportation in
motor vehicles for the disabled, wheelchair users must always
transfer to the seats installed in the motor vehicle with the
corresponding vehicle restraint systems!
01 / 2010
C2000