Operation
6.1.2 Armrests
Removing the Side Panel with Armrest
1. Loosen the thumb screw at the lower end of the side
panel holder.
2. Pull the side panel with armrest out upwards.
Fig. 9
L oosening the thumb screw for removal of the side panel
with armrest
Page 128
Adapting the Armrests to the Upper Arm Length
1. Loosen the Allen head screw using a 3 mm Allen wrench.
2. Move the side panel with armrest up or down along the
rail into the desired position.
3. Firmly retighten the Allen head screw.
Fig. 10
Adapting the armrest to the upper arm length
01 / 2010
C2000