Product Description; Delivery And Preparation For Use; Delivery - Otto Bock C200 Bedienungsanleitung

3 Product Description
The C2000 power wheelchair is suitable for indoor and out-
door use. It is compactly designed and easy to manoeuvre
for use indoors. Two 12 V batteries power its high-performance
drive system, which makes it possible, along with spring-
mounted drive wheels, to overcome obstacles (category C of
EN 12184) and to ensure safe operation.
The C2000 power wheelchair is controlled by an enAble50
wheelchair control system. It includes a control panel to enter
driving commands and display the current status as well as
a controller that controls the drive motors and other electrical
functions based on the input data. Data transmission is real-
ised via a bus system.
Since the enAble50 can be programmed, it is possible to
adapt the control unit to the personal requirements of the
user; e. g. the speed, acceleration and deceleration values
can all be adapted.
The C2000 power wheelchair features a chain steering.
The special features of the C2000 power wheelchair include:
n Possibility of turning the seat around using a parts kit, in
order to change between front-wheel drive and rear-wheel
drive.
C2000
Product Description | Delivery and Preparation for Use
n Easy servicing due to good and clear accessibility of all
component groups
n Customisation with options and custom fabrication using
modular components.
The modular design of the C2000 power wheelchair makes
it possible to add other modules and devices in addition to
the main components (see Fig. 2), e. g. special controls (see
Section 7.2).
4 Delivery and Preparation for Use

4.1 Delivery

WARNING
Risk of accidents and injury due to incorrect settings. All
later adaptation or setting work may only be carried out by
authorised specialist dealers.
INFORMATION
The options included in the scope of delivery depend on the
product configuration that has been selected for the C2000
power wheelchair.
01 / 2010 Page 119