Otto Bock C200 Bedienungsanleitung Seite 150

Operation
No unauthorised persons are permitted in the danger area.
There must not be any interfering objects or obstacles in the
seat adjustment area. There are crushing points caused by
the construction in the area between the seat frame and
wheelchair frame. Never let any parts of the body (hands,
feet) or objects get under the raised seat. This risk of crush-
ing must be explained to the attendants.
CAUTION
Risk of injury if the power wheelchair tips over. Before
driving up inclines or over curbs, a tilted seat must be lowered
to its basic position, the seat height adjustment device must
be in its lowest position and the back must be in the upright
position. Since tipping resistance is reduced in such situa-
tions, additional caution is required.
Slightly tilt the seat to the rear when driving down inclines
or curbs and reduce the speed (max. 3 km/h).
CAUTION
Risk of falling. Do not lean the upper part of the body beyond
the seat area while the seat is raised.
Page 150
CAUTION
Risk of accidents due to a restricted field of vision. Keep
in mind that your field of vision is restricted when driving the
wheelchair with the seat in the raised position and when
actuating the seat with built-in height adjustment.
NOTICE
Risk of damage caused by overload. Depending on the
standard version, the maximum load capacity is 160 kg or
200 kg; the maximum load capacity of the heavy-duty version
is 260 kg.
NOTICE
Risk of damage due to improper maintenance. Inspect
the seat height adjustment device for visible signs of damage
at least once a month and ensure all screw connections are
tight. Also maintain correct air pressure in the tyres.
NOTICE
Risk of damage during transportation. Always lower the
seat height adjustment device fully for loading or transporta-
tion.
01 / 2010 C2000