Safety Requirements For Operation - Otto Bock C200 Bedienungsanleitung

Safety
INFORMATION
Prior to using the power wheelchair, all the necessary mechani-
cal adaptations (e. g. mounting special controls) and software
settings (e. g . programming the control) must be made to comply
with the individual requirements and abilities of the user. The
settings may only be made by trained specialists who have
been authorised by Otto Bock.
INFORMATION
When installing special controls, the user is obliged to have a
specialist dealer give him or her detailed instructions on how
to use them.
INFORMATION
The mounting position of the device for seat height adjustment
and / or the seat must not be modified.
Page 106
2.5 Safety Requirements for Operation
WARNING
Risk of accidents and injury due to defective safety
functions. The user is obligated to ensure that the power
wheelchair and its safety functions are in safe and proper
condition before every use.
The power wheelchair may only be operated if all safety
functions, e. g. the automatic brakes, are functional. Brake
failure can result in serious accidents with fatal injuries.
WARNING
Risk of accidents and injury due to incorrect configuration
settings. Modified parameter settings in the configuration
can lead to changes in driving characteristics. In particular,
changes to the speed, acceleration, braking or joystick set-
tings can lead to unexpected and therefore uncontrollable
operating performance with a risk of accidents. Always test
the driving characteristics of the power wheelchair after
configuration / programming is complete.
01 / 2010 C2000