Additional Electrical Functions - Otto Bock C200 Bedienungsanleitung

Display symbol(s)
Tab. 2 Battery indicator on the control panel
6.3.5 Additional Electrical Functions
INFORMATION
For more information on additional electrical functions, please
see Section 6.7.
The other electric additional functions, such as electric back
angle adjustment, seat tilt or footrests, are also activated by
pressing the button "M", which must be held down for ap-
proximately 2 seconds.
To change between the different functions, shortly press the
button "M" or move the joystick to the right. The function that
is currently selected is shown on the LCD display. The respec-
tive function can be extended or retracted by moving the
joystick ahead or back. The electric motor moves the respec-
tive function as long as the joystick is deflected, and stops at
the end positions.
C2000
Information
Attendant control
Electric back angle adjustment: When the joystick is de-
flected ahead or back, the backrest electrically moves ahead
or back accordingly. The electric motor moves the backrest
as long as the joystick is deflected, and stops at the end
positions.
Electric seat tilt: Deflecting the joystick to the rear will electri-
cally tilt the seat to the rear. Deflecting the joystick to the front
tilts the seat ahead until it is level (factory setting; can be
adapted by the specialist dealer).
Seat height adjustment device: Deflecting the joystick ahead
or back electrically raises or lowers the seat.
Electric footrests: Deflecting the joystick ahead or back
raises or lowers the electric footrests.
Coupled seat adjustment: Deflecting the joystick ahead or
back moves the backrest and seat forward and down or back
and up simultaneously.
You can switch back to driving mode by pressing the "M"
button.
01 / 2010
Operation
Page 139