Operation
5
4
3
2
1
Fig. 15 / 16 Control panel; underside of control panel
1 Joystick
2 Direction indicator, left
3 Warning flasher
4 LCD display
5 On / Off button
6 Mode button
On / Off Button
The on / off button is used for switching the power wheelchair
on and off and for activating the drive-away lock.
Page 134
6
7
8
11
9
7 Horn
8 Direction indicator, right
9 Light
10 Programming receptacle
11 Inputs for extern. push-buttons
Mode Button
Briefly pressing the mode button increases the speed level.
After reaching the maximum speed level, you can change
back to speed level 1 by pressing the key again (1-2-3-4-5-
10
1-...). Pressing and holding the button (at least 2 seconds)
activates the "Electrical seat function" menu (see Section
11
6.3.5).
Horn
The horn will sound as long as the horn button is being pressed.
Warning Flasher
Pressing the warning flasher button activates / deactivates
all four direction indicators.
Light
The front and rear lights are activated and deactivated by
pressing the light button.
Direction Indicators
The right or left front and rear direction indicators are acti-
vated and deactivated by pressing the "direction indicator,
right" or "direction indicator, left" button respectively. The
direction indicators automatically go out after 20 seconds.
01 / 2010
C2000