Drive-Away Lock Information Window - Otto Bock C200 Bedienungsanleitung

Display Information
symbol(s)
Drive-away lock
Tab. 4 Display of the drive-away lock on the control panel
Activation via separate LCD monitor
If a special control is used, the drive-away lock is activated
using the separate LCD monitor. Select the menu item "Drive-
away lock" in the menu "Settings". Activation is confirmed
with an acoustic signal and the control unit is switched off.
C2000
Fig. 18 Drive-away lock information window
Deactivation via control panel
1. Press the On / Off button to turn on the control.
2. Move the joystick into the front end position until you hear
a beep.
3. Move the joystick into the rear end position until you hear
a beep.
4. Release the joystick.
5. Another beep confirms the successful deactivation of the
drive-away lock.
01 / 2010
Operation
Page 141