Operation
6. The speed level and battery indicator appear on the LCD
display, and the control unit is ready for driving.
The drive-away lock is deactivated and the wheelchair can
be driven.
INFORMATION
If the joystick sequence is not completed correctly, the drive-
away lock remains engaged. Turn the control of the power
wheelchair off and on again and make another attempt at
deactivating the drive-away lock.
Deactivation via separate LCD monitor
After switching the power wheelchair on, an information window
appears on the LCD monitor. Deactivation is similar to "Deacti-
vation via control panel".
Page 142
6.4 Lighting
The C2000 power wheelchair is equipped with a lighting instal-
lation as standard equipment. The control panel is used to
turn on the warning flashers, lights and right / left direction
indicators.
Front lights
One halogen light and one direction indicator are attached
to the side panels on the right and left side.
Fig. 19
Front lights
Rear lights
On the back of the power wheelchair, two back-up lamps
with integrated direction indicator are installed on the frame.
01 / 2010
C2000