Malfunctions / Troubleshooting
INFORMATION
Lamp housings or lamps can be ordered from a specialist
dealer.
Front lights
To change the halogen lamp in the front light, proceed as
follows:
1. Fold the pane forward with slight pressure on the black
locking lever at the lower end of the lamp.
2. Remove the pane with the attached halogen lamp.
3. Replace the defective halogen lamp with a new one.
4. Reinsert the pane.
Page 180
Fig. 41
Replacing the front halogen lamp
To change the halogen lamp in the front direction indicator,
proceed as follows:
1. Open the front direction indicator by inserting a narrow
flathead screwdriver into the recess on the direction indi-
cator housing (Fig. 42, item A) and tipping the pane down.
2. Remove the pane (Fig. 42, item B).
3. Slightly rotate the halogen lamp to release it from the lock
on the lamp socket and pull it out (Fig. 42, item C).
4. For mounting, slide the halogen lamp in and rotate it into
the lock.
01 / 2010
C2000