Maintenance and Care
Component
Activity
Armrest and side
Fastening screws tightened
panel
Armrest and control panel secured
Check armrest for damage
Drive wheels
Wheels must rotate freely and without axial run out
Central nut on the driving shaft tightened
Check if wheel mounts are seated securely
Directional stability of the entire power wheelchair
Tyres
Air pressure (printed on the sidewall of the tyre)
Sufficient tread depth, at least 1 mm
Check for damage
Batteries
Check liquid / acid level
(not with gel batteries)
Lighting
Perform visual check for damages
Test the electrical function
Electronics
Control system free of errors
Charger does not indicate any error messages on the LCD
display
Check plug connections
Brake
Activate brake lever while control unit is switched on
Check for active brake function while the brakes are
locked
Page 174
01 / 2010
Daily
Weekly
Prior to every use
X
X
X
X
Prior to every use
X
X
Monthly
X
X
X
X
X
X
X
X
X
X
C2000