Setting Mode - Prophete REX BIKE Bedienungsanleitung

TOUR 3 Normal motor support
SPEED 4
Strong motor support
BOOST 5 Maximum motor support
DRIVING BEHAVIOUR WITH MOTOR SUPPORT
The driving behaviour of the E-Bike may differ considerably from riding a bicycle when cycling
with active motor support.
Therefore, adjust the support level of your motor to the external environment (e.g. the track
routing, traffic density, properties of the ground), speed, and your own skills. E.g. always use
a low support level at all times in narrow bends or at low speeds.
PUSHING AID
Keep the button (fig. AU) pushed to accelerate the E-bike up to the speed of 6 km/h with-
out any pedal movement. If you release the button prematurely without moving the pedals,
the motor will stop automatically.

SETTING MODE

In setting mode, you can reset the distance kilometre counter (TRIP) and set the brightness
of the displays in sequence. Activate setting mode as follows:
1. Push the buttons (fig. AU) together for 2.5 seconds to get to setting mode.
RESETTING THE DISTANCE KILOMETRE COUNTER (TRIP) - ST1
1. Use the buttons to choose (y) if you want to reset the distance counter or (n) to continue dis-
tance counting.
2. Briefly confirm your selection with the button
or push the button
SETTING THE DISPLAY BRIGHTNESS - ST2
1. Then select the brightness level (1-3) with buttons (fig. AU).
2. Briefly confirm your selection with the button
kilometre counter or push the button
All manuals and user guides at all-guides.com
for approx. 2 seconds to leave setting mode.
for approx. 2 seconds to leave setting mode.
(fig. AU), in order to set the display brightness
(fig. AU), in order to then reset the distance
DRIVE SYSTEM
EN 41