First Commissioning | Inspections Before Starting A Ride; Initial Operation - Prophete REX BIKE Bedienungsanleitung

All manuals and user guides at all-guides.com
INTENDED USE • FIRST COMMISSIONING | INSPECTIONS BEFORE STARTING A RIDE
FIRST COMMISSIONING &
INSPECTIONS BEFORE STARTING A RIDE
• Check whether your E-bike is safe for operation before every ride. Remember that your
E-bike may have fallen over when you did not see it or that third parties may have ma-
nipulated it.
• Perform the following inspections before every ride and make any settings that
DANGER
are necessary. Non-observance may lead to damage to the E-bike or failure of
important parts! Danger of damage and accidents!
WARNING

INITIAL OPERATION

The E-bike was delivered in the pre-installed condition for shipping-technical reasons. This
means that not all parts and screws will be tightened ex works. Before initial commissioning,
you must tighten and may have to set the following components:
• Saddle clamp
• Headlights
• Handlebar, stem and any
handlebar attachments (such as brake grips,
bell, gearshift lever, rotary handle switch, display/operating unit)
For more detailed information about setting and installation, see the following chapters of
the E-Bike components.
BEFORE STARTING THE RIDE
Before every ride, you must check the following parts for function or tight fit:
• Charge the rechargeable battery with the enclosed charger
• brakes (incl. tightness at hydr. brake system)
• quick-clamp
• deflection/damper/shock
• handlebar
• pedals
• rims (check for wear and concentricity)
• tyres (check for damage and barometric pressure)
Additionally, you must comply with the intervals indicated in the maintenance plan for regular
inspection and repair and observe the care and maintenance instructions (see chapter Main-
tenance | Care).
EN 14
• Pedals
• Basket
• Lighting
• spokes
• bicycle bell
• saddle
• gearshift