Fold In The Frame; Suspension Fork - Prophete CITY Bedienungsanleitung

STEEL FOLDING FRAME

FOLD IN THE FRAME

1. Loosen the quick-clamp of the frame
2. Turn the complete quick-clamp by at least 90° towards
the rear wheel (Fig. AA).
2
3. Fold in the frame.
FOLDING OUT THE FRAME
1. Fold the frame out to the stop. The closing mechanism
must latch audibly.
2. Turn the complete quick-clamp towards the front wheel.
3. Close the quick-clamp by flipping the lever (s. also chapter
Quick-clamp).

SUSPENSION FORK

Many bicycles are equipped with suspension forks to give you as the rider better cycling com-
fort.
In some models, the spring pre-tension can be adjusted individually. In this case, the fork
may be adjusted to the weight of the rider and payload.
For athletic bicycles such as mountain bikes, the type of ground or terrain is also decisive.
The spring pre-tension can be optimally adjusted to the terrain that way.
SETTING THE SPRING PRE-TENSION
• Never turn the setting screw beyond the stop, since this will damage the fork!
Danger of damage!
WARNING
You can set the spring pre-tension of the fork by turning
the lateral adjustment screw of the triple clamp (fig. AB).
Depending on equipment, the adjustment screw is on the
left, right or both sides of the fork.
Stiffer
deflection
More comfortable
suspension
(fig. AA).
1
turn clockwise
(+)
Turn counter-
clockwise (–)
FOLDING FRAME • SPRING FORK
AA
2
AB
1
EN 19