Handlebar - Prophete CITY Bedienungsanleitung

HANDLEBAR

HANDLEBAR
• Ensure before every ride and after setting that the handlebar, the screws of the handle
attachment, the closure mechanics and the handlebar quick clamp are fitted tightly!
Danger of accident!
• The handlebar must not be inclined at straight rides. Danger of accident!
DANGER
• Do not put any carrying bags on the handlebar for transporting objects, since this may
impair the riding performance. Danger of accident! Instead, only use commercial bicy-
cle baskets or handlebar bags.
WARNING
The handlebar setting depends on the handlebar stem installed depending on the bicycle.
RIGID HANDLEBAR STEM
C
2
1
In a rigid handlebar step, the handlebar can be adjusted in height, position and inclination
angle depending on version (except for version fig. E).
SETTING THE POSITION AND HEIGHT
• The stem must not be pulled out beyond the maximum mark of the handlebar shaft!
The mark of the minimum insertion depth on the handlebar shaft must not be visible.
Danger of break and accidents! No warranty if this is not observed!
DANGER
1. Release the clamping screw
ing screw (fig. E) with a 13-mm hexagon wrench.
1
2. Set the handlebar or stem position and height.
3. Tighten the clamp screw
specifications).
EN 10
D
1
2
(fig. C + D) with a 6-mm hexagon socket wrench or the clamp-
1
again well according to the torque specification (s. chapter torque
1
E
1
2