Prophete CITY Bedienungsanleitung Seite 99

SHIMANO NEXUS INTER 7
SETTING THE GEAR SHIFT
1. Use the turning rotary handle to shift from the 1st to the 4th
gear.
2. Check the current shifting setting by looking at the two yel-
low marks on the rear wheel hub (s. fig. BA). The gear shift is
set correctly when both marks are precisely opposite at the
same height.
3. Adjust the gear shift by turning the black setting screw on
the rotary handle of the gear shift (s. fig. BB).
4. Check the correct function of the gear shift by shifting
through the gears several times.
REMOVING THE REAR WHEEL
1. Use the turning rotary handle to shift to the 1st gear.
2. Disconnect the brake cable
der to take out the wheel more easily later.*
3. Release the brake counter-holder on the left side of the bicy-
cle (fig. BD).
1
4. Release the axle nuts on both sides of the rear wheel with a
15 mm wrench.
5. Take the two axle nuts including the safety washers
BD) off the axle.
6. Pull out the rear wheel from the drop-out.
7. In order to release the rear wheel from the shift cable, turn
the circlip (fig. BE) by approx. 45° counter-clockwise. Now
you can disconnect the circlip and the actuating lever from
the rear wheel.
*only for models with a rear wheel V-brake rim brake
(fig. BC) from its guide in or-
1
BA
BB
BC
(fig.
2
BD
1
GEARSHIFT
1 2
2
EN 37