Troubleshooting - Prophete CITY Bedienungsanleitung

TROUBLESHOOTING

TROUBLESHOOTING
The lighting
does not work
Insufficient
brake output
Shift gears
not clean or
cannot be engaged
Occurrence of unusual noise
when cycling
Bicycle runs
"stiff"
No or insufficient spring effect
EN 56
Wrong operation
Cable defective
Plug contact released
Lamp defective
Brake linings worn
The brake is set incorrectly
The brake has run too hot at perma-
nent stress (e.g. on long downhill
rides)
Gearshift misadjusted
Shifting components
defective or bent
The stem/handlebar screws are not
tightened
Chain not lubricated sufficiently
Chain to tight
The foot pedal attachment is not tight-
ened
Air pressure too low
Brake drags
Too-high gear engaged
Spring element too tense
Switch on lamps
Replace cable
Connect
plug contacts
Replace lamp/LED headlight
Replace the brake linings
Adjust brake
Use all brakes alternatingly
Setting the gear shift
Replace shifting element
Retighten stem/
handlebar screws
Lubricate chain
Retension chain
Tighten
bottom bracket attachment
Increase the air pressure
Adjust brake
Shift to lower gear
Adjust the suspension to a softer set-
ting