Torque Specification - Prophete CITY Bedienungsanleitung

TORQUE SPECIFICATIONS
• T he screws and nuts installed on the bicycle must be checked for tight fit at regular in-
tervals (see maintenance plan) and may need to be tightened or re-tightened to the
proper strength. Only this can ensure that the bicycle permanently complies with the
safety-technical requirements and works properly.
DANGER
• If screw and nuts are tightened too far, they may break. Danger of damage and acci-
dents!
• If parts are marked with torque specifications, these must be complied with. The
torque wrench permits precise compliance with the tightening torques.
WARNING • T he torque specifications for other screw connections do not apply to the adjustment
screws at the gearshift and brake components.
Wheel nuts, front
Wheel nuts, rear
Foot pedal arm, steel
Foot pedal arm, aluminium
Pedals
Stem, clamping screw
A-Head stem, clamping screws
Handlebar clamping block screw (2xM6) handlebar
clamping block screw (4xM5)
Handlebar bracket attachment
Brake shoes
Brake disc attachment
Attachment of side dynamo
Damper/Shock
Seat post clamping ring
Saddle clamp
Other steel screws
Size / strength class
M3
M4
M5
M6
M8
20-25 Nm
25-30 Nm
30 Nm
30-35 Nm
30–35 Nm
20–30 Nm
9–11 Nm
10–14 Nm
6 Nm
20 Nm
5–7 Nm
5–7 Nm
10 Nm
10 Nm
8–12 Nm
18–22 Nm
5.6 6.8 8.8
0.7 Nm 0.9 Nm 1.2 Nm 1.7 Nm
1.7 Nm 2.1 Nm 2.8 Nm 4.1 Nm
3.4 Nm 4.3 Nm 5.5 Nm 8.1 Nm
5.9 Nm 7.3 Nm 9.6 Nm 14 Nm
14.3 Nm 17.8 Nm 23 Nm 34 Nm
TORQUE SPECIFICATIONS
Other
VA screws A2/A4
10.9 50 70
- -
- -
1.7 Nm 3.5 Nm
3 Nm 6 Nm
7.1 Nm 16 Nm
80
-
-
4.7 Nm
8 Nm
22 Nm
EN 55