Prophete CITY Bedienungsanleitung Seite 100

GEARSHIFT
INSTALLING THE REAR WHEEL
1. Place the actuating lever on the hub of the rear wheel. Ob-
serve that the yellow marks of the actuating lever cover the
yellow marks of the hub (fig. BF).
2. Place the circlip on the actuating lever and turn it by approx.
45° clockwise. (fig. BE and BF)
3. Place the rear wheel into the drop-out.
4. Apply the safety washers on the axle so that the interlock is
in the drop-out (fig. BG).
5. Fasten the rear wheel with the axle nuts (fig. BG). Ensure
that the wheel is placed straight in the holder and that the
chain is appropriately tensioned. (see chapter Chain ten-
sioning).
6. Attach the counter-holder bracket on the left side with the
pipe clamp screw connection
7. Connect the brake cable
8. Check that the brake works properly and adjust it if neces-
sary (s. chapter Brake).*
9. Set the gear shift (s. chapter Setting the gear shift).
*only for models with a rear wheel V-brake rim brake
EN 38
at the frame (fig. BD).
1
(fig. BC) again.
1
BE
for mounting align the
yellow markings on each
other
ratched
rotate by 45°
monting ring
fix the bracket to the switch arm
properly
BF
ratched yellow marker
align
switching arm
cover
drive unit
note
direction
yellow marker
BG
backup disk
chapping nut