Common Malfunctions & Solution; Product Specifications - Citysports CS-600 Bedienungsanleitung

Common Malfunctions & Solution
Fault Occurrence
After power on, the machine
doesn't work.
The machine has no reaction to
the remote control.
The sound of "XiuXiu" or
"DaDa" appears on the
machine
The indicator light is still on
when you turn off the power.
Though power off the machine
is, the light will be on when you
move on the machine.
The power cord is broken and
there is strange smell or smoke
in the product.

Product Specifications

Name
Model
Recommended age
Rated Votage
Rated power
Rated working time
Swing frequency
Implementation standards
Maximum carrying weight
Technical parameters are subject to change without notice
Packing List
Name
Host
Push-up handle
Instruction
exercise band
Remote control
English /
Possible Reasons
Check whether or not the machine is
turned on.
Check whether or not the outlet has a
poor contact.
The batteries of remote control may be
not installed properly or power off.
It may be too far for the machine to
react.
The sound result from the mechanical
structure.
The remaining power stored in the
controller has not been discharged.
The movement driven the motor to
generate induction.
Stop using immediately and send it to repair.
Bodybuilding Vibration Plate
CS-600
14
AC 220V / 50Hz
200 w
20 min
5-10Hz
GB4706.1-2005 GB4706.10-2008
110kg
1PC
2PCS
1PC
2PCS
1PC
German / French
Turn on the switch.
Check the outlet to ensure that it has
a good contact with the plug.
Install it properly or replace it with a
new one.
Go ahead to reduce the distance and
point the remote control at the host.
It's normal.
It's normal.
It's normal.
Quantity
-5-
/ Spanish / Italian
Solution
/ Dutch