DOK-IM*MLC-FM******V10-RE04-DE-P
Rexroth IndraMotion MLC 10VRS Funktionsmodule
6.4.2
Hardwarebeschreibung
Adressierung
Frontansicht
Konfigurationsmöglichkeiten
Ausgehend von der Frontansicht des CrossComm SERCOS 2-Funktionsmo‐
duls wird die Konfiguration eines Einfach- und eines Doppelringes gezeigt.
Abb.6-47:
Frontansicht des Funktionsmoduls CrossComm SERCOS II (CFL01.1-
Q2)
An einer IndraMotion MLC können maximal 4 (bei einer IndraMotion MLC L25
max. 2) Funktionsmodule angeschlossen werden.
Bezüglich SERCOS 2- und SERCOS III-Funktionsmodulen sind folgende Kon‐
figurationen möglich:
Bosch Rexroth AG
SERCOS 2/III Querkommunikation
73/157