Abicor Binzel iCAT Betriebsanleitung Seite 53

iCAT
6.8 Attaching the ABIROB
1
®
1 ABIROB
GC torch neck
2 Protective cap
Fig. 13 Attaching the ABIROB
®
GC torch neck
2
3
Retaining nut
4 iCAT ABIROB
®
GC torch neck
1 Equip the ABIROB
gas nozzle.
 Instruction leaflet BEI.0073.
2 Slide retaining nut (3) and protective cap (2) onto the ABIROB
neck (1) from the front.
3 Mount the ABIROB
positioning pin (5) in the iCAT ABIROB
®
4 Tighten ABIROB
®
ABIROB GC (4). Use a wrench AF20 suitable for this purpose.
5 Replace protective cap (2).
3
5
®
GC
®
GC torch neck (1) with tip adaptor, contact tip and
®
GC torch neck (1) with positioning bore onto
®
GC torch neck (1) with retaining nut (3) on the iCAT
6 Putting into operation
4
5
Positioning pin
®
GC torch
GC (4).
EN - 21