Abicor Binzel iCAT Betriebsanleitung Seite 34

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
1 Identification
1.1 EU Declaration of Conformity
1.2 Responsibilities of the User
2 Product Description
2.1 Designated Use
2.2 Use contrary to the designated use EN-4
2.3 Technical Data
2.4 Abbreviations
2.5 Nameplate
3 Safety Instructions
3.1 Classification
3.2 Emergency information
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional Description
6 Putting into operation
6.1 Maintenance position of the robotEN-10
6.2 Fastening the iCAT to the robot EN-11
6.3 Mounting the corrugated hose
clamp
®
6.3.1 Motoman
® ®
6.3.2 ABB , Reis , OTC
6.4 Mounting the hose assembly
on the robot
6.4.1 ROBO WH
6.5 Mounting the liner
EN - 2
EN-3
EN-3
EN-4
EN-4
EN-4
EN-4
EN-7
EN-7
EN-7
EN-7
EN-8
EN-8
EN-9
EN-9
EN-9
EN-10
EN-11
EN-12
®
EN-12
EN-13
EN-16
EN-17
6.6 Attaching the ABIROB
torch neck
6.7 Attaching the ABIROB
torch neck
6.8 Attaching the ABIROB
torch neck
6.9 Attaching the ROBO WH
torch neck
7 Operation
8 Putting out of operation
9 Maintenance and cleaning EN-21
9.1 iCAT Cleaning the ABIROB
9.2 iCAT Cleaning the ABIROB
9.3 Cleaning the iCAT
®
ABIROB GC
9.4 Cleaning the iCAT ROBO WH EN-25
10 Troubleshooting
11 Dismounting
12 Disposal
12.1 Materials
12.2 Consumables
12.3 Packaging
13 Appendix
iCAT
®
A
EN-17
®
W
EN-18
®
GC
EN-19
EN-20
EN-20
EN-21
®
A EN-22
®
W EN-23
EN-24
EN-26
EN-27
EN-28
EN-28
EN-28
EN-28
EN-28