Scope Of Delivery; Transport - Abicor Binzel iCAT Betriebsanleitung

4 Scope of delivery

4 Scope of delivery
• iCAT robot mount
• Operating instructions
• Screw driver for hexagon head screws, wrench size 2.5
• Sealing grease silicone-free 10 g can
Tab. 11 Scope of delivery iCAT ABIROB
• iCAT robot mount
• Operating instructions
Scope of delivery iCAT ABIROB
• Protection cap 980.0013
Tab. 12 Scope of delivery iCAT ABIROB
• iCAT robot mount
• Operating instructions
• Hand lever
Tab. 13 Scope of deliveryiCAT ROBO WH

4.1 Transport

Checking procedure
on receipt of goods
In case of complaints
Packaging for
returning the goods
Tab. 14 Transport
EN - 10
®
A
®
GC
®
GC and iCAT ABIROB
For the installation of the cable assembly for iCAT, A, W, GC, we recommend
a pull-in tool (980.2153). It is not included in the scope of delivery and must
be ordered separately as accessory.
Order the equipment parts and wear parts separately.
Order data and ID numbers for the equipment parts and wear parts can be
found in the current catalogue. Contact details for advice and orders can be
found online at www.binzel-abicor.com.
The components are carefully checked and packaged, however damage may
occur during shipping.
Make sure that the shipment is complete by referring to the delivery note!
Check the package and components for damage (visual inspection)!
If the goods have been damaged during transport, contact the last carrier
immediately! Keep the packaging for possible checks by the carrier.
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
• Certificate of conformity
• 6 cylinder screws M4x10
®
• Key for ABIMIG
• Certificate of conformity
• 6 cylinder screws M4x10
• Nut 980.0014
®
W
• Certificate of conformity
• 6 cylinder screws M4x10
• Sealing grease silicone-free 10 g can
iCAT