Abicor Binzel iCAT Betriebsanleitung Seite 47

iCAT
1 2
14
13
12
11
1 Pull-in tool
2 Threaded sleeve
3 Bellows
4 Cable assembly connection
5 Cable assembly huide
Fig. 8 Mounting the
3
A6
10
6 Cable assembly
7 Mounting direction of the cable
assembly
8 Robot
9 Corrugated hose clamp
®
cable assembly
ABIROB
A, GC, W
NOTICE
• For optimum guiding of the cable assembly, we recommend dismounting
any cable assembly guides (6) present or the clamp of the robot (9).
Steps (1) to (10) refer to the versions iCAT-ABIROB
axes = A4, A5, A6.
1 Unscrew threaded sleeve (2) and bellows (3).
2 Unscrew fastening screw (14) from the welding torch coupling (11) until
screw head and washer (13) make contact.
3 Introduce cable assembly (6) from behind through the 4th axis of the
robot (8).
6 Putting into operation
4 5
A5
9
10 iCAT
11 Welding torch coupling
12 Retaining screw
13 Washer
14 Fastening screw
®
6
A4
7
8
A, GC and W. Robot
EN - 15