B&R BRCOMP1-0 Anwenderhandbuch Seite 164

B&R COMPACT PLC
12.7 AINJ - ANALOG INPUT COMPACT PLC
The function block is used for initializing the analog inputs. The converted values and the alarm bits for
range exceeding and Signal failures are sent to outputs.
NOTE: The analog conversion is always done in the END routine.
AINJ
Function block length:
First Scan:
Inputs/Outputs
ENABLE
MODE
- 164 -
84 lines
No
Description
If the ENABLE input is set to 1, the function block is executed.
Channel mode setting.
Mod c1 Mod c0
7
Mode
0
1
2
3
4
5
6
7
Resistance measurement (0 - 65000 Ω)
8
Resistance measurement (0 - 4500 Ω)
9
1)
Version 1.30 and higher
Analog input
Compact PLC
1
ENABLE
1 MODE
1 FILTER
1 RATE
Mode channel 1
Mode channel 0
0
Signal
±10 V
±2.5 V
0 - 20 mA
KTY10 (Temperature in °C)
KTY10 (Temperature in F)
reserved
reserved
reserved
AINJ
ALARM 1
INPUT1 2
INPUT2 2
Address types
R, F, #
R, #
1)
1)