Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Settings
By clicking on the arrow symbol
hardware you want to work with is marked. It can be identified by the article
number.
Figure 11: Target System Selection
CR2500 is marked and acknowledged with
When a concrete target system has been selected, the window is enlarged
considerably. Many tabs are for functions that are not supported by this
hardware. CoDeSys is a universal programming system. The most important
tab is the one for 'Network functionality'. There the parameters for
communication are set via CAN. This is not a topic here (
Communication with
But it is easier to prepare us for working with CAN just now. For this reason,
please let the options 'Support parameter manager' and 'Support network
variables' active. Then we have to append the subelement CANopen Master in
the PLC Configuration (
the moment.
What has to be done, if the article number is not displayed in the selection
screen?
This will only happen with new hardware. Then the respective file will be
ordered from ifm electronic or loaded from the Internet and installed
subsequently.
Subsequent installation of the target
Since this happens occasionally, the process will be briefly described. If the
required target is already in the selection list, this section can be skipped. You
will continue with the Section 'Main program', page 2-10.
It has to be noted that here files are not simply copied into a directory. To avoid
errors due to an unsuitable directory structure, the Help program
InstallTarget.exe will be used. It is directly in the CoDeSys V2.3 directory.
After starting InstallTarget the following window will open:
2-8
the selection list will open. There the
CAN).
Figure 30). Then the topic CAN can be ignored for
.
Training manual 2:
Werbung
Kapitel
Inhaltsverzeichnis
