Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A small ecolog CoDeSys project as a start
Display the P_And program on the monitor (double click on the program name
in the POU list on the left in the program window). The program window should
look like Figure 57.
Figure 57: Program Active
If the status line cannot to be seen at all, activate it via the option 'Project'
'Options' 'Operating range'. Just click to activate the tick √.
Change
As shown in Figure 57 the values of the three variables A , B and C are FALSE
variable values
(OFF). By means of the option 'Online' 'Write Values' the values can be
changed as follows:
Double click on FALSE at A and B and TRUE appears as shown in Figure 58.
This figure shows that the changes are not yet active! They have to be sent to
the (simulated) controller first.
3-16
ONLINE, SIM and RUN
must now be active.
Werbung
Kapitel
Inhaltsverzeichnis
