IFM Electronic ecomot mobile R 360 Serie Starterset-Handbuch Seite 194

A small ecolog CoDeSys project as a start
Figure 76: Finished Visualisation
Working with We can now test the newly created visualisation picture. Log in CoDeSys and
the start the program. Proceed as described before. The following points will serve
visualisation as a reminder:
●
●
●
First click on rectangle A in the visualisation, then on rectangle B. The colours
of the two rectangles should change to green (or to another colour, should you
have used your artistic licence). The green colour shows that the variables now
have the state TRUE in the program.
If you now watch the colour of the ellipse of variable C, you will see the result of
the programmed link – the colour of the element changes to red (or to what your
artistic license has defined). The red colour corresponds to the value TRUE of
variable C as a result of the AND operation (C:=A AND B).
By clicking on the rectangles you can set the different plant states and watch
the reaction of the program (
3-28
'Online' 'Simulation' ('√' shows that the simulation is active)
'Online' 'Login'
'Online' 'Start'
Figure 77 and Figure 78).