Editing Functions For Fbd; Functions For Sampling Trace - IFM Electronic ecomot mobile R 360 Serie Starterset-Handbuch

Buttons

Editing functions for FBD

'Input'
Inserts an additional input for an operator, e.g. an AND function.
'Output'
Inserts an additional output, e.g. for an operator.
'Box'
This means operators, functions, function blocks, programs (standard or self-
defined) and conversions. The default setting AND operator has to be
overwritten.
'Assign'
Transfers the result of the linked operators of the network to the address to be
indicated (output).
'Jump'
Inserts a jump.
'Return'
Inserts a return to finish the function.
'Negate'
Inserts a negation for an input or output.
'Set/reset'
The appropriate outputs take on the state TRUE or FALSE (S: 1 click, R: double
click) if the preceding link is TRUE. This value is retained even if the condition is
no longer fulfilled.

Functions for sampling trace

'Start trace'
Loads the trace definition into the controller. Starts the sampling trace.
'Read trace'
Transfers the sampling trace to the PC. Enables the graphical presentation of
the values.
'Stop trace'
Stops the sampling trace.
'Stretch'
Stretches the time axis of the graphical presentation for a better overview of fast
changing states.
'Compress'
The opposite of stretch.
5-4