Directories - IFM Electronic ecomot mobile R 360 Serie Starterset-Handbuch

Installation
The inputs in this start window are of special importance. This will be described
in more detail further below. For the time being we select the option FBD and
confirm it by OK.
A remark beforehand: Do not change the name PLC_PRG!

Directories

Search path Since the same programming surface is used for different hardware
configurations, the required files need to be accessible. The device-specific
files are listed in different subdirectories. It would be confusing to provide all
of them right from the start. First, it has to be stated in which subdirectory
they can be found.
This is done via the menu items: 'Project' 'Options'. Select the category
Directories in the displayed dialogue box that opens ( Figure 16).
Figure 16: Set Directories
By selecting the target some entries have already been made.
C:\Program files\ifm electronic\CoDeSys V2.3\Library\ etc.
A very important entry is still missing, however. In addition it has to be
indicated where the configuration files of the project are. This entry is not
made automatically to enable working with different version numbers.
By clicking on the button to the right of the field the selection screen will
open.
R
2-11