IFM Electronic ecomot mobile R 360 Serie Starterset-Handbuch Seite 152

Program start
Error message If one or several error messages are displayed, other paths may have been
selected during set-up. For the time being they can be ignored. Further below
we will describe the adaptations that will have to be made.
The example program may look like this:
Figure 8: Example Program
We will not deal with this any further here. The continuous work on this project
is made easier if the one opened last is loaded automatically during program
start-up. Therefore the example program will open here. If you do not want this,
you can change it via 'Project' 'Options'.
2-6