IFM Electronic ecomot mobile R 360 Serie Starterset-Handbuch Seite 174

A small ecolog CoDeSys project as a start
Figure 41: Inserted Operator
F2
Here we want to point out a possibility to help you program more efficiently and
: The key
avoid typing errors at the same time: the <F2> key. When working with
CoDeSys you often reach points requesting a selection between several input
possibilities.
You can see an example in Figure 41. CoDeSys has entered an AND operator
here as default setting. The field with the coloured background (Windows
standard setting is blue) signals such an option. Press <F2> to open a selection
screen. Try it, and you will get a list of operators that can be used here or other
boxes. You can select the requested operator by means of a double-click. This
option saves a lot of typing and prevents typing errors! In our case the default
setting AND is okay and you should close this selection screen by pressing
Figure 42: Input assistant
Forgotten the A common mistake in the early stages is to open a new project and to forget the
settings libraries and the hardware configuration (pages 2-13 and 2-16) in the heat of
the work. You will become aware of it when you use the Input assistant for a
particular function block, for example. If you do not find it the reason why is that
you probably have not linked any hardware-specific library, for example.
3-8
(Figure 42).
If windows with such a coloured
background appear
screen, remember F2!
Move the bar to the
requested operator and
select it with double
click or 'OK'.
on the