IFM Electronic ecomot mobile R 360 Serie Starterset-Handbuch Seite 192

A small ecolog CoDeSys project as a start
Variable B (a We now want to create another picture element for variable B that should look
simple copy) like the one for variable A. The option Copy/Paste will be helpful. To do so:
●
●
→
●
→
Move the cursor to the new element A, press the left mouse key, drag the
element to the requested position and release the mouse key (
and Figure 74).
Figure 73: Copy Element
Figure 74: Element Pasted and Dragged
Now configure the second element:
●
●
●
The element for variable B has been successfully added.
3-26
Click on element A
Click on
A copy of the element (with settings) is made (in the clipboard).
Click on
The copy is inserted in the picture above the original.
call up the element configuration with a double click,
replace A with B for variables, input and text and
acknowledge the entry with
When element A is marked,
click on the Copy icon and
then on the Paste icon. Then
click on the copy and drag it
to the new position.
Double click to set the
new configuration
.
Figure 73