Add Program - IFM Electronic ecomot mobile R 360 Serie Starterset-Handbuch

Point 1 has already been described. To illustrate point 2 we want to add a
second program to the project and activate it with PLC_PRG to ensure its
cyclical execution.
Settings If you have not yet done so, work through the sections on pages 2-11 to 2-19.

Add Program

Add a program with the name P_AND to the project with menu item 'Project'
Adding an
P_AND 'Object' 'Add... ' (Figure 35).
The name must not be AND,
3-6.
Figure 35: Project Add Object
A window similar to Figure 36 should show.
R
for details about the term 'key words' see page
The start
3-5