IFM Electronic ecomot mobile R 360 Serie Starterset-Handbuch Seite 205

The start
Figure 93: Communication Parameters 2
For example, the name "serial1" is entered here and the respective entry is
marked. After acknowledgment with the new channel has been entered.
Figure 94: Communication Parameters 3
A comparison with Figure 87 shows that the baud rates do not correspond.
Figure 95: Communication Parameters 4
A double click on the value activates the selection window. With each other
double click the value changes to the next permissible setting. So you will finally
get to the correct value.
Figure 96: Communication Parameters 5
R
3-39