Online Program Test - IFM Electronic ecomot mobile R 360 Serie Starterset-Handbuch

Online program test

In the following text we will start to gradually leave out the description of the
intermediate steps. When working with CoDeSys a lot will (hopefully) become
routine. You can focus on the important points, the process to be controlled, and
it will not take a long time to find what you need in the menu items. However,
should a problem come up you can find the solution in the step-by-step
instructions above.
It is clear that the first step is to start CoDeSys again.
Copy project Of course, we have to modify the first project EasyAnd for the online test. For
this purpose we will first create a copy with the name ANDOL with 'Save as...'
as described above.
Login First of all the connection to the controller is established via 'Online' 'Login' or
('Simulation Mode' off!). If this does not work more settings will have to be
made.
The following message may be displayed:
Figure 89: Error Message during Login
Setting of the interface parameters of the downloader
the downloader. Once the connection with the downloader has been
established, the same parameters have to be set here in CoDeSys.
Press
Parameters'. The following window will be displayed:
R
for acknowledgement and click on 'Online' 'Communication
The start
Figure 87 only refers to
3-37