Securing The Air Sled - Stryker Power-PRO IT 6510 Bedienungs- Und Wartungshandbuch

SECURING THE AIR SlED

Prior to installing the Air Sled on the on the model 6510 Power-PRO™ IT cot, read and understand this manual and the
manual supplied with the incubator. These instructions explain how to secure the Air Sled to the litter surface of the
model 6510 Power-PRO™ IT cot with straps.
WARNING
• The Air Sled, no adaptor option, (6510-042-000) is designed to secure incubators without an adaptor to the model
6510 Power-PRO™ IT cot. Using this configuration on any cot other than the model 6510 Power-PRO™ IT cot or
using any unapproved incubators on this adaptor may result in damage to the cot and/or injury to the patient or
user.
• Stryker is not responsible for specification or option changes to Air Sled compatible incubators.
To secure the air sled to the litter surface:
1. Attach the straps (not supplied), as
shown in Figure 32, to secure the Air
Sled to the litter surface (A).
2. Ensure that the straps (B) are secured
from the head end push bars to the Air
Sled (Figure 32).
3. Confirm that the Air Sled is secured
to the cot as shown in Figure 33.
Figure 33
www.stryker.com
Cot Operation
A
B
6510-009-005 REV A
Figure 32
Return To Table of Contents
English
1-55