Preventative Maintenance; Lubrication - Stryker Power-PRO IT 6510 Bedienungs- Und Wartungshandbuch

English
Preventative maintenance should be performed at a minimum of annually. A preventative maintenance program should
be established for all Stryker Medical equipment. Preventative maintenance may need to be performed more frequently
based on the usage level of the product. The cot requires regular maintenance. Establish and follow a maintenance
schedule and keep records of maintenance activity (see
CAUTION
A preventative maintenance program should be established for all Stryker EMS equipment. Preventative maintenance
may need to be performed more frequently based on the usage level of the product. Close attention should be given to
safety features including, but not limited to:
• Hydraulic power mechanism
• All electrical controls return to off or neutral position when released
For additional maintenance information, see the preventative maintenance information on
WARNING
• Do not modify the cot or any components of the cot. Modifying the product can cause unpredictable operation
resulting in injury to the patient or operator. Modifying the product will also void its warranty (see
• Escaping fluid under pressure can penetrate the skin causing serious injury. Avoid the hazard by relieving pressure
before disconnecting hydraulic or other lines. Tighten all connections before applying pressure. If an accident
occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed within a few hours or
gangrene may result. Doctors unfamiliar with this type of injury should reference a knowledgeable medical source.
• To avoid the risk of injury, do not use bare hands to check for hydraulic leaks.
When using maintenance products, follow the directions of the manufacturer and reference all material safety data
sheets.
CAUTION
• Improper maintenance can cause injury or damage to the product. Maintain the cot as described in this manual.
Use only Stryker approved parts and maintenance procedures. Using unapproved parts and procedures could
cause unpredictable operation and/or injury and will void the product warranty (see
• Failure to use authorized parts, lubricants, etc. could cause damage to the cot and will void the warranty of the
product.
• Hydraulic lines, hoses, and connections can fail or loosen due to physical damage, kinks, age, and exposure.
Check hoses and lines regularly to avoid damage to the cot. Check and tighten loose connections.
• Do not tip the cot onto its load wheels and actuate the product as this will allow air to enter the hydraulic system.

lUBRICATION

The cot has been designed to operate without the need for lubrication.
CAUTION
Do not lubricate the bearings in the X-frame as it will degrade the performance of the cot and may void its warranty (see
page 1-86).
Return To Table of Contents
1-58

Preventative Maintenance

page 1-61
6510-009-005 REV A
for a form).
page 1-61.
page 1-86).
page 1-86).
www.stryker.com