Using The Hour Meter - Stryker Power-PRO IT 6510 Bedienungs- Und Wartungshandbuch

Operation Guide
English

USING THE HOUR METER

The hour meter, located on the foot end control enclosure as shown in Figure 23, indicates the amount of time (HHH.H
hours) that the hydraulics have been activated. You can use the hour meter to determine the frequency for preventative
maintenance procedures as listed on page 1-58.
A
Figure 23: Hour Meter
Return To Table of Contents
www.stryker.com 6510-009-005 REV A 1-45