Product Description; Delivery / Preparing The Wheelchair For Use; Delivery - Otto Bock A200 Gebrauchsanweisung

3 Product Description
The Power Wheelchair may only be used indoors. It is com-
pactly designed and easy to manoeuvre for use indoors.
Two 12 V batteries power its high-performance drive sys-
tem, which makes it possible, to comfortably overcome
obstacles (category B of EN 12184) and to ensure safe
operation.
The VR2-control unit is used to control the power wheelchair.
The control unit comprises a control panel for entering the
driving commands and for displaying the current state of the
functions as well as a controller that uses the input data to
control the drive motors. Data transmission is realised via a
bus system.
Because the VR2 control unit is programmable, it can be
adapted to the personal requirements of the user; e.g. the
speed, acceleration and deceleration values can all be ad-
apted.
The special features of the power wheelchair include:
„ Compact design.
„ Easy to disassemble for transport.
„ Easy to service due to modular component group concept.
„ Easy access to all component groups.
A200
Product DescriptionI | Delivery / Preparing the Wheelchair for Use
4 Delivery / Preparing the Wheelchair for
Use

4.1 Delivery

INFORMATION
The options included in the delivery depend on the product
configuration that has been selected for the power wheelchair.
Scope of delivery includes:
„ Adapted power wheelchair with main components (see
fig. 2)
„ Charger
„ Instructions for Use
„ Options (see section 7)
Upon delivery by the specialist dealer the power wheelchair
is ready for use. All the settings correspond to the indica-
tions on the order form or are adjusted directly on site by the
dealer. The power wheelchair is adapted to the personal re-
quirements of the individual.
The functions of the individual components can be tested by
following the instructions in section 6. Possible malfunctions
are described in section 8.
Ottobock | 91