Product Description - Otto Bock C2000 Gebrauchsanweisung

Product Description
3

Product Description

The C2000 power wheelchair is suitable for indoor and out-
door use. It is compactly designed and easy to manoeuvre
for use indoors. Two 12 V batteries power its high-perform-
ance drive system, which makes it possible, along with
spring-mounted drive wheels, to overcome obstacles (cate-
gory C of EN 12184) and to ensure safe operation.
The C2000 power wheelchair is controlled by an enAble50
wheelchair control system. It includes a control panel to en-
ter driving commands and display the current status as well
as a controller that controls the drive motors and other elec-
trical functions based on the input data. Data transmission
is realised via a bus system.
Since the enAble50 can be programmed, it is possible to
adapt the control unit to the personal requirements of the
user; e. g. the speed, acceleration and deceleration values
can all be adapted.
128 Ottobock
|
The C2000 power wheelchair features a chain steering.
The special features of the C2000 power wheelchair in-
clude:
n Possibility of turning the seat around using a parts kit, in
order to change between front-wheel drive and rear-
wheel drive.
n Easy servicing due to good and clear accessibility of all
component groups
n Customisation with options and custom fabrication using
modular components.
The modular design of the C2000 power wheelchair makes
it possible to add other modules and devices in addition to
the main components (see Fig. 2), e. g. special controls (see
Section 7.2).
C2000