Figure 27 Unlocking The Battery Drawer And Removing The Track; Figure 28 Removing The Batteries By The Handles - Otto Bock C1000 DS Gebrauchsanweisung

Operation
Figure 27 Unlocking the battery drawer and removing the track
5. Use a ring or open-end wrench size 11 to disconnect
all cables from the batteries.
6. Remove the batteries by the handles.
186 Ottobock
|
Figure 28 Removing the batteries by the handles
7. Put the new batteries in place. Ensure that the batteries
are up against the stop.
8. Use a ring or open-end wrench size 11 to connect all
cables to the batteries. Observe correct polarity (black
cable = connection to negative pole, red cable = con-
nection to the positive pole).
9. Reinstall the track. Ensure that there is no play be-
tween the batteries and track when installing the track.
C1000 DS