Electrically Footrests; Manual Seat Functions; Safety Instructions; Figure 37 Elevated Footrest - Otto Bock C1000 DS Gebrauchsanweisung

To put a power wheelchair with back angle adjustment into
operation:
„ Unfold the back rest.
„ Insert the cross bolt at the end of the drive unit into the
holder.
„ Lock the bolt (by pushing down the lever) so the latch
engages the bolt (Figure 36).
Verify that the back angle adjustment bolt and
INFORMATION
lock are secure!

7.1.5 Electrically Footrests

INFORMATION
Please also observe the safety instructions in the section
„Electric Seat Functions" > „Safety Instructions for Use".
To avoid permanent pressure loads or to ensure anti-shock
positioning, the power wheelchair offers the possibility of
mounting electrically adjustable footrests (Figure 37). With
the control unit in "additional function" mode, the right and
left footrest can be selected separately or simultaneously. To
adjust them, use the joystick.
The amount of space available for getting into or out of the
wheelchair can be increased by flipping the footplates up.
C1000 DS
Figure 37 Elevated footrest
7.2

Manual Seat Functions

7.2.1 Safety Instructions

WARNING
Risk of injury due to exposed pinch points in the seat ad-
justment area.
„ Note that when manual seat options are used, inher-
ent pinch and shear points are located between the
seat frame and the power wheelchair frame.
Accessories
Ottobock 195
|